A Smart Bluetooth Button that can be programmed wirelessly
Puck.js is an intelligent Bluetooth button. With the Espruino JavaScript interpreter on its internal ARM microcontroller, software can be uploaded, debugged and modified wirelessly from any modern computer or phone, making development of embedded devices significantly easier. It has built-in sensors, lights, infrared transmitter, GPIO, and can even control other Bluetooth LE devices.
This is version 2.1 of the popular Puck.js - with added accelerometer, gyro, FET, calibrated temperature sensor and improved Bluetooth signal strength!
Don't need all the sensors? Check out the cheaper Puck.js Lite
Features
- Bluetooth Low Energy
- Espruino JavaScript interpreter pre-installed
- nRF52832 SoC - 64MHz ARM Cortex M4, 64kB RAM, 512kB Flash
- 7 x 0.1" GPIO (capable of PWM, SPI, I2C, UART, Analog Input)
- 2 x SMD GPIO (capable of PWM, SPI, I2C, UART)
- 1 x 200ma FET output
- ABS plastic rear case with lanyard mount
- Silicone cover with tactile button
- MMC5603NJ Magnetometer
- LSM6DS3TR-C Accelerometer/Gyro
- PCT2075TP Temperature sensor
- IR Transmitter
- Built in light and battery level sensors
- Red, Green and Blue LEDs
- NFC tag programmable from JavaScript
- Pin capable of capacitive sensing
- Weight: 14g in plastic case, 20g in packaging
- Dimensions of plastic case: 36mm dia, 12.5mm thick
- Dimensions of bare PCB: 29mm dia, 9mm thick
- Click here for full technical information
- Puck.js's Certifications are listed on espruino.com
Shipped in box with instruction card and 1x CR2032 battery included.
See a list of tutorials for Puck.js on the main Espruino Website or have a look on the Espruino forum.
Puck.js silicone front cases can also be laser etched with your logo or design for a setup fee of £50 and per-case cost of £3. Please get in touch for more information.
Note: The only difference between Puck.js v2 and v2.1 is the change of magnetometer from ST LIS3MDLTR to Memsic MMC5603NJ. All existing code will work unmodified as long as it isn't using Puck.magRd/magWr for register-level access to the magnetometer.
| Features | |
| Inputs | Button, Temperature, Light, 3 axis Magnetometer (compass), 3 axis accelerometter & gyro |
| Outputs | RGB LED, IR LED, Programmable NFC tag, FET 200mA output |
| GPIO (0.1") | 7 |
| GPIO (Other) | 2 |
| Features | Bluetooth LE, NFC tag |
| Memory | |
| RAM (kB) | 64 |
| Flash (kB) | 512 |
| Processor | |
| Clockspeed (MHz) | 64 |
Espruino Puck.js v2.1
- Brands Espruino
- Product Code: ESPRUINO_PUCKJS_V2
- Availability: 786
-
£32.40
- Ex Tax: £27.00
-
- 2 or more £31.20
- 5 or more £30.00
- 10 or more £28.80
- 20 or more £27.60
- 50 or more £26.40
- 100 or more £25.20
Available Options
Related Products
Espruino Pixl.js
A Bluetooth microcontroller with built-in LCD display and Arduino footprintPixl.js is a smart LCD wi..
£36.00 Ex Tax: £30.00
Espruino Puck.js Lite
A Smart Bluetooth Button that can be programmed wirelesslyPuck.js is an intelligent Bluetooth button..
£27.60 Ex Tax: £23.00
MDBT42Q Breakout (ceramic antenna)
This board has the same Bluetooth LE module (with ceramic antenna) that we use on Puck.js and Pixl.j..
£20.00 Ex Tax: £16.67
MDBT42Q Module
The same Bluetooth LE module that we use on Puck.js and Pixl.js, pre-programmed with Espruino. Just ..
£12.00 Ex Tax: £10.00
MDBT42Q Breakout (u.FL antenna connector)
This board has the same basic Bluetooth LE module that we use on Puck.js and Pixl.js,..
£24.00 Ex Tax: £20.00
Espruino Jolt.js
Jolt.js is a programmable Bluetooth motor driver board. Control powerful external devices such as li..
£42.00 Ex Tax: £35.00
MDBT42V Module
This is an ultra-small Bluetooth module (MDBT42V-P512KV2), pre-programmed with Espruino. Just apply ..
£12.00 Ex Tax: £10.00
Espruino Jolt.js Bundle (plus 2 motors)
Jolt.js is a programmable Bluetooth motor driver board. Control powerful external devices such as li..
£58.80 Ex Tax: £49.00
Feasycom BP119 Bluetooth 4.0 Long Range USB Dongle
Need longer range Bluetooth LE communications? This is the dongle for you!The FSC-BP119 USB Bluetoot..
£30.00 Ex Tax: £25.00
Puck.js Cover Selection
Normal Puck.js devices come with a plain white silicone cover, but in many cases you might want some..
£9.00 Ex Tax: £7.50
Puck.js Blue Cover
Normal Puck.js devices come with a plain white silicone cover, but in many cases you might want some..
£2.40 Ex Tax: £2.00
Puck.js Green Cover
Normal Puck.js devices come with a plain white silicone cover, but in many cases you might want some..
£2.40 Ex Tax: £2.00
Puck.js Black Cover
Normal Puck.js devices come with a plain white silicone cover, but in many cases you might want some..
£2.40 Ex Tax: £2.00
Puck.js Red Cover
Normal Puck.js devices come with a plain white silicone cover, but in many cases you might want some..
£2.40 Ex Tax: £2.00
Puck.js Yellow Cover
Normal Puck.js devices come with a plain white silicone cover, but in many cases you might want some..
£2.40 Ex Tax: £2.00
Puck.js White Cover
This is exactly the type of cover than comes with normal Puck.js devices. If you've written on ..
£2.40 Ex Tax: £2.00
Puck.js Rear Cover
This is exactly the type of cover than comes with normal Puck.js devices. It's Black ABS plasti..
£2.40 Ex Tax: £2.00
Puck.js Rear Cover Unbranded
This is exactly the type of cover than comes with normal Puck.js devices. It's Black ABS plasti..
£2.40 Ex Tax: £2.00
Puck.js Programming Jig
You can update all Espruino BLE devices wirelessly using Nordic's DFU app, but it can take a lot of ..
£30.00 Ex Tax: £25.00
Bluetooth Beacon Kit
Create your own professional looking Bluetooth Beacon with your own sensors on it.This kit contains ..
£18.00 Ex Tax: £15.00
Bangle.js 1 Smart Watch
Bangle.js 1 is now discontinued. Bangle.js 2 is available here!Bangle.js 1 is an open, hackable smar..
£69.96 Ex Tax: £58.30
Tags: Espruino, Puck.js, BLE, Bluetooth LE