This board has the same Bluetooth LE module (with ceramic antenna) that we use on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript!
Also see the MBDBT42Q Breakout with external antenna
We sell pre-programmed bare modules, but this is a board with 0.1" pins, a voltage regulator, 2 LEDs and a button. It's thin, small, and very power efficient.
Features
- Bluetooth Low Energy
- Espruino JavaScript interpreter pre-installed
- nRF52832 SoC - 64MHz ARM Cortex M4, 64kB RAM, 512kB Flash
- 22 GPIO (capable of PWM, SPI, I2C, UART) on 0.1" pitch, including 7 analog inputs
- Built in thermometer
- NFC tag programmable from JavaScript (when antenna added)
- 2.5v - 16v input voltage range, drawing ~20uA while advertising.
- Powerful (250mA, 500mA peak) MCP1703T 3.3v voltage regulator, capable of powering an ESP8266
- Dimensions: 18mm x 28mm x 4mm thick
- Click here for full technical information
- MDBT42's Certifications are listed on espruino.com
Features | |
Inputs | Button, Temperature |
Outputs | Red & Green LED, Programmable NFC tag |
GPIO (0.1") | 22 |
Memory | |
RAM (kB) | 64 |
Flash (kB) | 512 |
Processor | |
Clockspeed (MHz) | 64 |
MDBT42Q Breakout (ceramic antenna)
- Brands Espruino
- Product Code: MDBT42_BREAKOUT
- Availability: 960
-
£20.00
- Ex Tax: £16.67
-
- 2 or more £19.20
- 10 or more £17.60
- 20 or more £16.00
- 50 or more £15.19
- 100 or more £14.40
Related Products
Tags: Espruino, MDBT42Q, BLE, Bluetooth LE