Jolt.js is a programmable Bluetooth motor driver board. Control powerful external devices such as lights, motors, solenoids and relays, all from a device that can run for months or even years on a battery!


During November, the first 50 Jolt.js ordered will come free with two yellow 1:90 TT Motors!


This is a bundle containing a Jolt.js plus extra useful components, in a box - you can also buy Jolt.js on its own


This bundle contains:

  • Jolt.js and its silicone case
  • A 300mAh Lithium Polymer battery that can plug in and be recharged by Jolt.js when it is connected to USB, providing enough power for 6 months with Bluetooth enabled!
  • 4x Qwiic connectors, allowing connection to the Bangle's 2x FET outputs and 12 GPIOs
  • A 2mm screwdriver that fits Jolt.js's terminals perfectly
  • An Instruction card and clear plastic box

You can be up and running in no time - plug in the battery, connect something to the screw terminals and start making things happen in the real world immediately!


With the Espruino JavaScript interpreter on its internal ARM microcontroller, software can be uploaded, debugged and modified wirelessly from any modern computer or phone, making development of embedded devices significantly easier. Jolt.js has 8 high power outputs, capable of 1A each, as well as 4 Qwiic connectors. It can even control and be controlled by other Bluetooth LE devices.


Jolt.js Features

  • Bluetooth Low Energy
  • Espruino JavaScript interpreter pre-installed
  • nRF52840 SoC - 64MHz ARM Cortex M4, 256kB RAM, 1MB Flash
  • 8x high power 1A H-bridge outputs on screw terminals
  • 4x Qwiic/Stemma connectors (2x analog capable with 500mA FET, 2x with 4x GPIO - 14 GPIO in total)
  • 2.7v to 18v input range
  • Ultra low power (down to 0.008mA) when idle
  • LiPo battery connector with inbuilt charger
  • USB-C with USB Serial support
  • 1x 3mm mounting hole
  • 1x Button
  • 40mm x 40mm x 12mm with protective silicone case
  • PCB Dimensions: 37.2mm x 36mm


Package Contents

Shipped in clear plastic box containing:

  • Instruction card
  • Jolt.js circuit board
  • Jolt.js Silicone case
  • 4x Qwiic cables
  • 300mAh Lithium Polymer battery (LP552030)
  • VHB tape (to stick battery)
  • 2mm Screwdriver (for terminal block)


See a list of tutorials for Jolt.js on the main Espruino Website or have a look on the Espruino forum.


Features
Inputs Button, 4x high voltage (18v) analog inputs
Outputs RGB LED, 8x 1A Motor driver outputs, 2x FET outputs
GPIO (0.1") 0
GPIO (Other) 4x GPIO on rear, 12 GPIO on Qwiic Connectors, 8x 1A motor driver outputs, 2x FET outputs
Features Bluetooth LE, Qwiic Connectors, 8x Powered Outputs, 2x FET outputs
Memory
RAM (kB) 256
Flash (kB) 1024
Processor
Clockspeed (MHz) 64

Write a review

Note: HTML is not translated!
    Bad           Good

Espruino Jolt.js Bundle (plus 2 motors)

  • Brands Espruino
  • Product Code: ESPRUINO_JOLTJS_BUNDLE
  • Availability: 130
  • £58.80

  • Ex Tax: £49.00

  • 2 or more £55.80
  • 5 or more £54.00
  • 10 or more £52.20
  • 20 or more £48.00
  • 100 or more £44.40

Related Products

Espruino Puck.js Lite

Espruino Puck.js Lite

A Smart Bluetooth Button that can be programmed wirelesslyPuck.js is an intelligent Bluetooth button..

£27.60 Ex Tax: £23.00

Espruino Puck.js v2.1

Espruino Puck.js v2.1

A Smart Bluetooth Button that can be programmed wirelesslyPuck.js is an intelligent Bluetooth button..

£32.40 Ex Tax: £27.00

Espruino Pixl.js

Espruino Pixl.js

A Bluetooth microcontroller with built-in LCD display and Arduino footprintPixl.js is a smart LCD wi..

£36.00 Ex Tax: £30.00

Espruino Pixl.js Multicolour Conference Badge

Espruino Pixl.js Multicolour Conference Badge

This is the Nodeconf EU 2018 Conference badge, with a few minor improvements as used in the&nbs..

£54.00 Ex Tax: £45.00

MDBT42Q Breakout (ceramic antenna)

MDBT42Q Breakout (ceramic antenna)

This board has the same Bluetooth LE module (with ceramic antenna) that we use on Puck.js and Pixl.j..

£20.00 Ex Tax: £16.67

MDBT42Q Module

MDBT42Q Module

The same Bluetooth LE module that we use on Puck.js and Pixl.js, pre-programmed with Espruino. Just ..

£12.00 Ex Tax: £10.00

Qwiic/Stemma cable for Jolt.js

Qwiic/Stemma cable for Jolt.js

This is a 100mm long Qwiic/Stemma cable that fits Jolt.js. Qwiic is on one and, and the other has 4 ..

£2.40 Ex Tax: £2.00

Espruino Jolt.js

Espruino Jolt.js

Jolt.js is a programmable Bluetooth motor driver board. Control powerful external devices such as li..

£42.00 Ex Tax: £35.00

Tags: Espruino, Jolt.js, Jolt, BLE, Bluetooth LE, Bundle